3M Sign Vinyl Film - Sign Supply Leader - Vinyl films for commerical & industrial sign making applications!

3M 7125 3M^TM Scotchcal^TM ElectroCut^TM Graphic Film - This film is intended for making permanent, durable graphics. This film can be used for vehicle graphics, striping, awnings and signs. This product is also designed to withstand severe weather and handling conditions. The product is durable and dimensionally stable. Made in a wide range of glossy colors. 7125 also offers a matte finish in white and black.

FDC series 1800 is 3M 180 3M™ Controltac™ Plus Graphic Film - This cast vinyl is intended for making repositionable, removable, durable graphics or lettering for both vehicle graphics and general signage. This vinyl has the comply performance, a feature that will allow trapped air to escape during application. This creates a bubble - free, fast and easy installation. To order punched material, use part number 1850.

FDC series 3635 is 3M 3635-100 3M™ Light Enhancement Film - This is for a light box or channel letters that contain lighting elements that illuminate the front sign face and transmit some light to the viewer. The white sign face materials typically used in cabinets transmit only about 25% to 30%. With a 94% plus reflectivity increases light output for greater sign luminance. This product comes premasked by 3M. To order punched material, use part number 3685.

FDC series 3635 is a 3M 3635-20 and 3635-22 3M™ Blockout Film - Block film is intended for blocking out light when applied to internally illuminated signs. This product enhances a neon-type effect when used on the second surface of clear acrylic substrate. This product can also be used on the front (first side) side of the application or the outside of an illuminated sign. To order punched material, use part number 3685.

FDC series 3635 is 3M 3635-210 and 3635-222 3M™ Dual Color Film - This unique film provides maximum color clarity and backlit brightness both day and night: the dual-color perforation pattern and the light management adhesive. Use dual-color film to create the special effect of a color-image by day (non lit) and a different color by night (back lit). Background color-image glows through the perforations in the dual color film. To order punched material, use part number 3685.

FDC Series 3635 is a 3M 3635-30 and 3635-70 3M™ Diffuser Film - This diffuser film is a light-diffusing film for clear plastic internally-illuminated signs. This product can be used for first and second surface applications. This film may also be thermoformed and is uniform in both reflective and transmitted light. To order punched material, use part number 3635.

FDC Series 3635 is a 3M 3635-91 3M™ Day/Night Film - This product produces the appearance of dark graphics during the day and white or colored graphics at night on internally-illuminated signs. To order punched material, use part numbe 3685.

FDC series 3630 is 3M 3630 3M™ Scotchcal™ Translucent Graphic Film - This is a cast translucent that comes in a wide color selection, many with pantone simulations. This product comes on a synthetic liner, is not affected by moisture and does not split if wet. The liner is also great for multi-color registration and has superior lay-flat characteristics. The 3630 has a low surface gloss to eliminate glare as well as uniform color in both reflected and transmitted light, intended for back-lit signage. This product is also sheetable. To order punched material, use part number 3680.

FDC 3930 is 3M 3930 3M™ High Intensity Prismatic Reflective Sheeting - It is a non-metalized micro-prismatic lens reflective sheeting designed for production of reflective traffic control signs, work zone devices and delineators that are exposed vertically in service. Applied properly it provides long-term reflectivity and durability. To used punched material, use part number 3980.

FDC series 5100 is 3M 5100R 3M™ Scotchlite™ Intermediate Reflective - This scotchlite brand reflective is a removable, retro-reflective 6 mil film designed for piezo inkjet printing. This short-term film is well suited for outdoor graphics such as commercial vehicle or fleet graphics, bus graphics, non-regulated industrial signage and emblems and stickers. To order punched material, use part number 5150.

FDC series 6800 is 3M 680 3M™ Scotchlite™ Reflective Graphic Film - This is a premium quality flexible, enclosed lens, retro-reflective film that resists cracking in cold climates. This product is ideal for both large graphics and graphics applied to corrugated substrates. 6800 comes with a positionable, pressure-activated adhesive that is a mechanical feature, not an adhesive property. To order punched material, use part number 6850.

FDC series 6801 is a 3M 680CR 3M™ Scotchlite™ Removable Reflective with Comply™ - This removable reflective is a premium quality flexible, enclosed lens, retro-reflective film that resists cracking in cold climates. This film is ideal for vehicle markings or general signage appications. 6801 comes with a positionable, pressure-activated adhesive this is a mechanical feature, not an adhesive property. To order punched material, use part number 6851.

FDC series 1120 is a 3M 1170 3M™ ElectroCut™ Film(EC Film) - This film was developed for exterior flat non-mobile signs and directional or advertising signage. The film is applied over reflective vinyl for desired effect and color or for transparent window graphics. To order punched material, use part number 1170.

FDC series 7725 is 3M 7725SE 3M™ Electrocut™ Graphic Film - Designed for pre-spaced lettering and graphics. Other uses include vehicle markings, window graphics, general signage, commercial and industrial graphics. 7725 has a lay-flat liner with superior cutting and weeding characteristics. To order punched material, use part number 7775.