Screen Printing Accessories

Engineered for business and ideal for heat transfer printing. When used with our ArmurInk/PRO-FLO system you separate all four color inks so you only refill the individual ink(s) needed without wasting unused ink colors. Our revolutionary ArmurInk system for the Epson Worforce 1100 provides the most efficient production system available on the market. Ideal for both entry-level and professional users.

The WorkForce 1100 is also ideal for impressive brochures, everyday projects and spreadsheets up to 13" x 19", the WorkForce 1100 has what it takes to make your business look its best. With maximum speeds of 30 ppm black and 17 ppm color, plus laser quality speeds of 13 ppm black and 5.5 ppm color, the WorkForce 1100 moves at your busy pace. It speeds through laser quality text up to 2x faster than leading competitive ink jet printers. And, prints are smudge, fade and water resistant, so you can print documents for immediate distribution. The WorkForce 1100 even offers convenient, two–sided printing, so you'll save 50% of your paper supply. And, with dual Black ink cartridges, you can print more and change cartridges less often. Engineered to be fast and efficient, this high performance printer brings quality without compromise to your business team.

• Printing Technology: 4-color CMYK
• Large prints up to 13" x 19" (Max Paper Size 13" x 44")
• Smudge, fade & water resistant
• Reliable paper feeding
• Manual 2-sided printing

These are brand new printers and they come with the full warranty from Epson.

The Epson 1400 with our ArmurInk system is the ideal printing solution for printing on our Commercial Grade "TransferJet" inkjet transfer paper.

This high grade inkjet film material makes it easy to produce film positives quickly and accurately. No need for a dark room or expensive camera!

The key is using our Armur Inks in combination with our film. Armur Inks contain UV blocking agents to allow film positives to be burned to screens and this is not found in OEM inks. Be aware you cannot us just any brand of ink.

See below for available Epson printers that use Armur Inks.

As an added bonus you'll be able to produce digital inkjet heat transfers with the same Armur Ink print system. All you'll need is our InkJet Heat Transfer Paper and you're ready to produce commercial grade digital transfers! Don't turn down those highly profitable short run full color jobs. The Armur Ink system is great for textile orders such as shirts, mouse pads, tote bags and more!

Note: You cannot us just any brand ink. Inks that are included from companies like Epson (and others) are not engineered for the purpose of printing on film. Our Black Armur Ink contains UV blocking agents to allow film positives to be burned to screens and this is not found in OEM inks.

Other things you should know:
Although only black is required to produce positive film you will still need all colors for the printer to work. If your using a RIP you may be able to select just the black channel to print.

In the Photoshop print driver control panel there is a setting to select called "separations". This setting will instruct the printer to print black or half tones (if applicable for multi color/process images). In "print preview" select "output" and select "half tones" and make further setting selections as needed.

Using RIP software allows for controlling individual channels to output the specific halftones needed in order to print film positives. The benefit of using a RIP; It's faster and produces high quality half tones. Take a look at RIP's from companies such Multi RIP, Wasatch or Color Burst.

Select 8.5" x 11" or 11"x17" after you enter QTY to cart.

Learn step-by-step what it takes!
This training provides a guided tour though each department of a successful garment-printing shop - Art, Screen-making, Inks, and Printing- and finishes up by boxing up shirts for the customer with incredible information and insight along the way.

Available in VHS format only.

Approximate Running Time: 105 minutes

The back light feature is great for inspecting pinholes, emulsion breakdowns, exposure effectiveness (on half tones) and fine lines during the washout process. The HIX washout booth is formed from a single piece of polyethylene plastic molded construction which makes it virtually leak-proof.


It is also chemical resistant, rust proof and impact resistant. The standard 1" drain and 1" hose hooks up easily to your drain system. The washout stand consists of solid welded aluminum frame construction with tooless assembly.

No seams, no cracks, no edges & no leaks.
Standard with back light.
1" drain & flexible 1" hose for easy hook up to drain system.
Welded aluminum frame construction.
Toolless assembly.
Chemical resistant.
Splashless front.
Booth Deminsions: 40" x 45" x 27"
Booth Stand Size: 21" x 27"
Max Screen Size" 29" x 37

The patented HIX Reten frame offers the most advanced features in frame technology. You'll save both time and money with our square sidebars. Fastrax mesh mounting system and Accutrax Tensioning. You'll also increase your mesh life dramatically (up to 7 times) while reducing your ink consumption by 20‰.


Square sidebars won't let Retens warp like some retensionables. They clamp easily into any printer without adapters saving you time and money. If you "gang run" smaller jobs you can rotate and reposition Retens in seconds. You won't be replacing any mesh due to nicking and tearing because there is no exposed fabric wrapped around our sidebars. Retens tape and handle like wood or rigid aluminum frames so there's no need for fabric protectors, special carts or special screen room handling.

The Fastrax system is the quickest "fabric to frame" technique available on any frame. There's no presoftening. Corners can be softened at any time during tensioning or retensioning. Our color coded double spline fabric locks easily in our continuous slot. No more damaged mesh from inferior end threading systems.

Tension control means quality control. That means Accutrax Tensioning. Dual tension jacks provide infinite fabric tension adjustments in each image area quadrant. You get consistent, controllable mesh tension and higher print quality with no thread distortion.

Increase mesh life up to 7 times.
Reduce ink consumption by 20‰.
Square side bars wont let Retens warp!
Get consistent, controllable, mesh tension.
High print quality with no thread distortion.

Specs
1. M SERIES for Manual Printers
Up to 108 O.D. total perimeter inches
60 Newton/cm rating
Stock frames: Any combination of 21", 23", 25", 27" O.D. sidebars
Maximum finished frame side: 27" O.D.
Channel size: 1-1/2"x1-1/4"

2. M/A 40 SERIES for Manual Printers
Up to 124 O.D. total perimeter inches
40 Newton/cm rating
Stock frames: Any combination of 21", 23", 25", 27", 31" O.D. sidebars
Maximum finished frame side: 31" O.D.
Channel size: 1-1/2"x1-1/4"

3. A SERIES for Automatic Printers
Up to 144 O.D. total perimeter inches
50 Newton/cm rating
Stock frames: Any combination of 23", 25", 31", 36" O.D. sidebars
Maximum finished frame side: 36" O.D.
Channel size: 1-1/2"x1-1/2"

4. LF SERIES for Automatic Printers and Large Format Printers
Up to 220 O.D. total perimeter inches
30 Newton/cm rating below 41" side, 25 Newton/cm rating 42"-48", 20 Newton/cm rating 49"-55"
All LF Frames are cut to order only - allow 1 week to 10 days
Maximum finished frame side: 55" O.D.
Channel size: 2"x1-1/2"

The King Pin Register system is designed to save additional set up time during pre press procedures. From film positive alignment, to screen exposure, to print set-up and registration the innovative King Pin system is simply the easiest to use; no measuring, no centering or taping.


You can combine the King Pin system with the optional HIX Micro-register print head. The pin plate quickly attaches to the new NP Bench and Rotary printer and can be easily retro-fitted to any existing HIX New Premier, Precisa or Bench printer. After aligning and punching film positives with the HIX hole puncher, simply place the art on the screen adapter plate dock the slotted Reten frames and expose your screens. After washing out the image and blocking out your screens, slide them onto your press’s dock pin and tighten.

Configuration Note:
The King Pin system will work on print heads using back or side clamps with only slight changes to handle subtle modifications and requirements of each configuration. On Side clamp configuration, the mount plate will be bolted onto the center of the cross tube. In the back clamp assembly, the mount plate will be attached and centered to the back inside wall just below the clamping bar.

1. After creating your own film positives or vellums, punch two holes with supplied King PIN hole punch.
2. Expose with the King PIN exposure plate, then mount the King PIN print head mount plate attached to the printer. Now you are ready to print in perfect registration.
3. Mount frames in alignment.

Specify 4 or 6 Color Kit