AIT/ASTEX Large Format Heat Press, Heat Presses, T-Shirt Press Machines, Heat Transfer Machines, Heat Transfer Presses

The new REV 2 press is totally electronic and requires no air. Both time & temperature are controlled with a push of a button, as well as our patented electronic pressure system. An electronic piece counter is also available. The REV 2 has a slide tray on the bottom platen which pulls out for loading. The operation is effortless and is totally silent. Both plates can be removed in a matter of minutes and replaced with various size extra plates and shapes.

The REV 2 features the unique 'Micro-Matte' heating element that is specifically designed for the quality heat control demands of dye sublimation printing. It will of course support all types of heat transfer applications including hot and cold plastisol peel transfers and heat activated laminating processes.

Features:
• Plate Dimension 16" x 20" (40 x 50cm)
• Temperature Ambient to 0 to 450ºF (232ºC)
• Time is adjustable from 0 to 999 seconds
• Net Weight – 200 lbs (90 Kg)
• Electrical 220/1 phase
• Amp draw 12
• Adjustable Pressure


Domestic Crating: Call for Quote
Export Crating: Call for Quote

The A.I.T. 1350PM is a semi-automatic heat transfer printing press designed for high pressure productivity with materials ranging from soft T-shirts to hard ceramic tiles. The 1350PM is 'Safety Certified' and will meet or exceed EC safety and efficiency standards.

Features:

• 16" x 20" (40 x 50 cm)
• Swing-away head for easy access to the entire surface
• Protects the operator from heat
• Interchangeable top and bottom platens available: 4"x4"- 16"x20"
• Quick disconnect design allows both platens to be changed in less than 5 minutes
• Large 6" diameter air cylinder generates even and repeatable pressure across the entire surface of each plate.
• Exclusive Astex Mica Heat Matte ensures quick recovery and consistent operating temperatures across the entire surface of the heated platen
• Astex Mica Heat Matte is superior to tubular cal rod heating elements found in low-end heat presses
• The matte has 100% contact with the platen to eliminate hot and cold spots and maintain operating temperature within 1 to 2 degrees throughout continuous operation of the press
• Digital temperature and time controls with precise settings to 0.1 degrees/seconds
• Safety features include swing-away head and 2-button close
• Options include interchangeable platens, cap accessory & laser light positioning system

Domestic Crating: Call for Quote
Export Crating: Call for Quote

Also available in Optional Double Heating Version: Call for Quote

The A.I.T. 1550PM is a two-button close, dual-platen heat transfer printing press designed for high productivity with materials ranging from T-shirts to hard ceramic tiles. The perfectly balanced heated head is easily moved between platens. A two-button close insures maximum operator safety. The head automatically raises at the end of the pre-set dwell time. Pressure and closing of the head is pneumatically controlled, thereby reducing operator fatigue and maximizing production.

Optional double heating makes this an ideal machine for printing rigid substrates including ceramic tiles.
Standard platen size is 16"x20".

1550PM 16"x20" Double Heating Version: Call for Quote
1550PMB 20"x24": Call for Quote
1550PMB 20"x24" Double Heating Version: Call for Quote

Features:

• Digital Temperature Control
• Digital Timer & Piece Counter
• Adjustable Pneumatic Pressure
• Operation by Two-Button Close
• 16" x 20" heated platen with swing-away head for easy access to the entire surface and to protect the operator from heat.
• Interchangeable top and bottom platens are available in sizes from 4"x4" - 20"x24"
• Quick disconnect design allows both platens to be changed in less than 5 minutes
• Large 6" diameter air cylinder generates even and repeatable pressure across the entire surface of each plate.
• The exclusive AIT Mica Heat Matte ensures quick recovery and consistent operating temperatures across the entire surface of the heated platen
• The AIT Mica Heat Matte is superior to tubular cal rod heating elements found in low-end heat presses
• The matte has 100% contact with the platen to eliminate hot and cold spots, and maintain operating temperature within 1 to 2 degrees throughout continuous operation of the press
• Digital temperature and time controls with precise settings to 0.1 degrees/seconds
• Safety features include swing-away head and two-button close


Options:

• Interchangeable platens
• Double heating with three independent temperature controllers
• Custom steel stand
• Laser light positioning system

Domestic Crating: Call for Quote
Export Crating: Call for Quote

The A.I.T. 1550PA is a fully automatic, dual-platen heat transfer printing press designed for maximum productivity with materials ranging from T-shirts to hard ceramic tiles. The printing cycle is automatically activated by a foot pedal switch. The heated press head automatically moves into position, drops, and presses for the pre-set dwell time. Operator movement is limited to loading and unloading operations, thereby reducing fatigue and maximizing production.

Optional double heating makes this an ideal machine for printing rigid substrates including ceramic tiles. Standard platen size is 16"x20".
Optional 20"x24" is available.

Features:

• Digital Temperature Control
• Digital Timer & Piece Counter
• Adjustable Pneumatic Pressure
• Automatic Operation by Foot Pedal
• Hand Safety Device
• 16”x20” heated platen with swing-away head for easy access to the entire surface and to protect the operator from heat
• Interchangeable top and bottom platens are available in sizes from 4"x 4" - 20"x24"
• Quick disconnect design allows both platens to be changed in less than 5 minutes
• Large 6” diameter air cylinder generates even and repeatable pressure across the entire surface of each plate.
• The exclusive AIT Mica Heat Matte ensures quick recovery and consistent operating temperatures across the entire surface of the heated platen
• The AIT Mica Heat Matte is superior to tubular cal rod heating elements found in low-end heat presses. The matte has 100% contact with the platen to eliminate hot and cold spots, and maintain operating temperature within 1 to 2 degrees throughout continuous operation of the press
• Digital temperature and time controls with precise settings to 0.1 degrees/seconds
• Safety features include swing-away head and automatic hand safety guard


Options:

• Interchangeable platens
• Custom steel stand
• Laser light positioning system
• Optional Double Heating

Domestic Crating: Call for Quote
Export Crating: Call for Quote

The A.I.T. 1550PAB is a fully automatic, dual-platen heat transfer printing press designed for maximum productivity with materials ranging from T-shirts to hard ceramic tiles. The printing cycle is automatically activated by a foot pedal switch. The heated press head automatically moves into position, drops, and presses for the pre-set dwell time. Operator movement is limited to loading and unloading operations, thereby reducing fatigue and maximizing production.

Optional double heating makes this an ideal machine for printing rigid substrates including ceramic tiles. Standard platen size is 20"x24".

Features:

• Digital Temperature Control
• Digital Timer & Piece Counter
• Adjustable Pneumatic Pressure
• Automatic Operation by Foot Pedal
• Hand Safety Device
• 20”x24” heated platen with swing-away head for easy access to the entire surface and to protect the operator from heat
• Interchangeable top and bottom platens are available in sizes from 4"x 4" - 16"x20"
• Quick disconnect design allows both platens to be changed in less than 5 minutes
• Large 6” diameter air cylinder generates even and repeatable pressure across the entire surface of each plate.
• The exclusive AIT Mica Heat Matte ensures quick recovery and consistent operating temperatures across the entire surface of the heated platen
• The AIT Mica Heat Matte is superior to tubular cal rod heating elements found in low-end heat presses. The matte has 100% contact with the platen to eliminate hot and cold spots, and maintain operating temperature within 1 to 2 degrees throughout continuous operation of the press
• Digital temperature and time controls with precise settings to 0.1 degrees/seconds
• Safety features include swing-away head and automatic hand safety guard

Options:

• Interchangeable platens
• Custom steel stand
• Laser light positioning system
• Optional Double Heating

Domestic Crating: Call for Quote
Export Crating: Call for Quote

The CA1000 Carousel Heat Transfer Press with 4 or 6 independently controlled pressing stations. Standard platen size is 16"x20" making this an ideal machine for t-shirts, however other platen sizes are available. Operation by foot pedal or automatic mode with programmable index time. The CA1000 is CE certified and will meet or exceed worldwide safety and efficiency standards.

The CA1000 Carousel features six of the AIT 1350PM heat press heads with the added feature of the bottom plate extending out of the machine for loading and unloading. Each of these heat presses feature the unique Mica Matte heating system for the exacting demands of heat control required by dye-sub printing.

The control system is extremely flexible. In the automatic mode the rotation speed can be set from 2 seconds to 60 seconds, and the machine will operate continuously until an E-stop is hit at the loading station. In the manual mode, the rotation is actuated by the operator with a foot pedal. The direct drive system utilizes a large AC inverter motor with a gearbox. There are no chains or sprockets.

Time, temperature and pressure is set individually on each of the six press heads. The standard carousel has interchangeable 16"x20" heated heads and bottom platens. Special size plates are available for both top and bottom plates. For example, small shirt sizes are best accommodated with an 12"x16" bottom plate. The top and bottom plates can be removed and replaced in less than 5 minutes with our "quick change" system.

Actual customer reported production is 8,000 T-shirts per day using 3 operators, a dwell time of 15 seconds and a rotation speed of 3 seconds.

Features:

• All functions are controlled by PLC
• 6 independent stations with independent control of time, temperature, and pressure
• 16"x20" heated platen size
• Each station complete with electronic safety device
• Bottom loading platform indexes in/out of the heat zone for ease of on loading and off loading
• Quick-connect design for optional interchangeable top and bottom platen sizes
• Temperature range 0º - 450º F


6 head available in 20"x24" platen size: Call for Quote

4 head 16x20: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

4 head 20x24: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

4 head 6x6 label: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

Models 120CR, 30” x 40”, & 240CR, 40” x 60”, platen style Heat Transfer Machines feature three zone heat control and two large pneumatic pressure cylinders making these models a cost effective solution for high quality dye sublimation of sports apparel, flags and banners. With the open side design, the new 120 & 240CR heat presses are ideal for the printing of table throws and runners. Both models are equipped with a single loading station which glides easily in and out of the pressing station. The closing cycle is activated with an OSHA approved two button close system.

In addition to dye sublimation, these models support all types of heat transfer applications including hot and cold plastisol peel transfers and heat activated laminating processes.

Features:
• Time is adjustable from 0 to 999 seconds.
• Three zone heat control.
• Temperature is adjustable from 0 to 450*F. (232C)
• Front-load tray system.


120 CR - 30"x40": Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

240 CR - 40"x60": Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

Model 162CR, 24"x36" Platen, Shown with Optional Double Heating & Optional Automatic Tray Operation.

The industry standard for 30 years is now equipped with three independently controlled zones of top heat and is ideal for fusing, heat transfer printing and film laminating. Equipped with pneumatic pressure control and digital timer, the heated platen automatically releases as the dwell time expires.

Platen pressure is easily adjusted with a regulator while the appropriate temperatures are maintained with a digital thermostat. The reciprocating tray system doubles productivity by providing a loading tray while the original tray is cycling. Options include double heating, automatic tray operation and a variety of felt and silicon rubber padding choices.

Features:
• Front-load tray system
• Three zones of heat control
• Digital time and temperature controls

Options:

• Double heating
• Hydraulic pressure system
• Air-operated automatic tray loading system

Domestic Crating: Call for Quote
Export Crating: Call for Quote

Model 354CR, 30" x 48" Platen, Shown with Single Heat & Manual Tray Operation.

The industry standard for 30 years is now equipped with three independently controlled zones of top heat and is ideal for fusing, heat transfer printing and film laminating. Equipped with pneumatic pressure control and digital timer, the heated platen automatically releases as the dwell time expires.

Platen pressure is easily adjusted with a regulator while the appropriate temperatures are maintained with a digital thermostat. The reciprocating tray system doubles productivity by providing a loading tray while the original tray is cycling. Options include double heating, automatic tray operation and a variety of felt and silicon rubber padding choices.

Features:

• Front-load tray system
• Three zones of heat control
• Digital time and temperature controls


Options:

• Double heating
• Hydraulic pressure system
• Air-operated automatic tray loading system

Domestic Crating: Call for Quote
Export Crating: Call for Quote

Large electrically heated platen sizes allow for full width strike-offs and large sheet printing of parts. Shown with six zone heat control of top & bottom platens, and automatic tray loading system.

Time, temperature and pressure settings are all adjustable and fully automatic. Floating head design assures perfectly even pressure in all areas. the front load reciprocating tray system doubles productivity.

Simplicity in design results in a virtually maintenance free machine.

Features:

• Electrically Heated Platen
• Digital Timer & Temperature Controls
• Floating Head for Even Pressure
• Reciprocating Trays for Loading
• Adjustable Pressure
• Exhaust System


Options:

• Double Heat with 6-Zone Heat Control
• Automatic Reciprocating Tray System with Operation by Push-Button


Benefits:

• Transfer Printing with Even Temperature and Even Pressure Across Printing Surface
• Reciprocating Trays Permit Loading and Unloading While Printing Cycle Underway
• Few Moving Parts Results in Minimal Maintenance

Domestic Crating: Call for Quote
Export Crating: Call for Quote

The AIT Model 1600 is a fully automatic large format heat transfer printing system specifically designed for Dye Sublimation printing of flags, banners, carpet tiles, ceramics, wood, plastics, and cut apparel parts. The heated upper platen automatically indexes from one station to the other. The Astex multi-zone heat control and hydraulic pressure system provides consistent quality. The Model 1600 is 'Safety Certified' and meets all EC Safety and Efficiency Standards.

Features:

• Six independently controlled heating zones allow precise control of temperature over the heated platen surface
• Digital temperature indication for each heating zone
• Symmetrically placed heating elements provide even heat throughout the platens, insuring color uniformity
• Hydraulic platen pressure of up to 36,000 lbs. (6 PSI)
• Precision ground steel platens insure minimum variation in flatness across the printing surface
• High-rigidity frame structure
• Traversing heated head allows for loading and reloading of parts during the printing cycle


Click here now, see it in action!

Options:

• "Gapping Mode" allows printing on substrates which are subject to crushing
• Head Safety Device
• Optional Double Heating
• Silicone rubber pad: Call for Quote
• Optional with 380 or 440V


1600- 50"x100": Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

1600- 79"x69": Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

1600- 60"x120": Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

The 7240IJO is an ideal entry level press for the Epson 7000 and 9000 series printers. The 7240IJO belt width is 47".

The new 7240IJO with a self contained oil heated drum is specially designed to meet the increasing demand for high quality ink jet Dye- sublimation transfer technology. The 7240 is also perfectly suitable for print fixation on direct printed textiles.

Features:

• 8" Diameter Drum
• Production 0,91 m/min (1 yard/min) at 40 second dwell time
• Automatic belt tracking system. No air is required.
• Oil heated cylinder with 2 electronic thermostats. One controls the oil temperature and the other, the outside surface of the drum
• Digital adjustable speed control
• Automatic cool-down system turns off machine when temperature reaches 90°C
• 2 Mechanical clutch unwinds for roll to roll
• Electric Requirements 220/1 phase, 30 Amps
• Average consumption 16 Amps
• Belt size 120 cm (47")
• Net weight 800 kg / 1760 lbs
• Dimensions 96 X 186 X 125 cm – 38" x 73" x 49"


Optional Rewind stations: Call for Quote
Optional 3rd Unwind Station: Call for Quote
Narrow web Unwind Station Roll/Roll: Call for Quote

Domestic Crating: Call for Quote
Export Crating: Call for Quote

The 7300IJO rotary heat press for dye-sub is an upgraded version of its moderately priced, high value, Model 7300IJ.

The 7300IJO model incorporates an oil drum heating system perfected in recent years on the AIT 120 GFO heat press. This self contained, oil heated drum system assures uniform heat across the width of the cylinder and the lowest possible power consumption. Compare features with all competition! Multiple safety systems, high quality electronic and pneumatic components and ergonomic, light weight air shafts minimize down time and maximize investment return. The IJO is the perfect machine for a start-up, large format, dye-sub printing operation. It works equally as well as a dye-fixing machine for direct printed textiles. High productivity, quality engineering design and conscientious after-the sale service are all good reasons for investing with AIT for all needs in dye-sub printing or textile dye fixation.

7360IJO: Call for Quote
7372IJO: Call for Quote

(Available w/o Unwind/Rewind Features - Call For Quote)

Features:

• Oil heated drum. Self contained with digital heat control
• Digital variable speed control
• Automatic belt tracking
• Printing widths of 60” (1.5m) or 72” (1.8m)
• 3 unwind stations with adjustable tension
• 3 rewind stations with separately controlled speed and tension
• Five light weight aluminum lift out bars with tapered cones for 3” cores
• Self locking safety chucks for all unwind/rewind bars
• 1.5 lin/ft/min (0.45 lin m/min) production speed at 40 second dwell
• 8” (33cm) dia drum
• “S” wrap bars for fabric tensioning
• Hand safety protection at entrance
• E Stops at all corners
• Lanyard controlled reversing system for safety & ease of feeding
• Dual Safety Reversing Systems
• Low maintenance, brushless drive motors
• All electronic controls. No air required
• Automatic cool down at shut down
• CE Certified

Options:

• Roll up table

Domestic Crating: Call for Quote
Export Crating: Call for Quote

The new oil heated 7372IJO SPORT rotary heat press has been specifically designed to meet the increasing demand for cut part digital printing.This method is widely used to print sport and team apparel.The new oil heating system guarantees a uniform heat distribution across the width of the drum with a minimum of energy cunsumtion. This system uses 50 % less energy than electrically heated presses. The 8" (20 cm) diameter drum is suitable in production speed for digital printing.

The 7372IJO SPORT has 3 different options of operation:

1. The transfer paper is placed design side up on the table and feeds continuously into the machine. The pre-cut parts are placed on the design and registered with maximum ease. The spent print paper and the printed parts exit under the feed table.
2. The transfer paper is fed continuously into the machine and cut fabric parts are placed on to the design areas. In this case the used transfer paper is re-rolled continuously under the feed table and the printed parts are released on to the slide tray.
3. Continuous printing roll-to-roll on both print paper and fabric.

7360IJO SPORT: Call for Quote
7372IJO SPORT: Call for Quote

(Available w/o Unwind/Rewind Features - Call For Quote)

Features:

• Diameter cylinder 20cm (8")
• Production 60 cm/min (2 ft/min)
• Substrate handling system - 3 unwinds and 3 rewinds
• Electronic belt tracking. No air required.
• Oil heated calendar with 2 electronic thermostats- one for checking the oil and one for the exterior of the drum
• Adjustable speed with digital control
• Automatic cool down system at the end of the work day safely turns off the machine when it reaches 80°C.

Domestic Crating: Call for Quote
Export Crating: Call for Quote



MODEL	POWER REQUIREMENT @220/3 PH	AVERAGE CONSUMPTION	BELT SIZE	WORKING WIDTH	NET WEIGHT	DIMENSIONS
7360IJO Sport	25 amps	15 amps	160 cm/64"	152 cm/60"	2205 lbs/1000 kg	100"x59"x74" 255x150x189cm
7372IJO Sport	35 amps	20 amps	190 cm/76"	180 cm/72"	3086 lbs/1400 kg	114"x49"x70" 290x125x178cm

The 6572 is ideal for cut part printing

The AIT 6572 is specifically designed for digital dye sub printing of apparel and other industries that require cut part, engineered prints. A new self contained, oil heated drum system assures uniform heat across the width of the cylinder and the lowest possible power consumption. AIT oil heated drum systems use 50% less electric power than all electric machines. Three drum sizes are available – 13" for the needs of the digital industry and a 24" or 39" for high production speeds.

AIT rotary heat presses with the new oil heated drum system will increase production, reduce seconds, and save on energy costs. High productivity, quality engineering design and conscientious after-the sale service are all good reasons for investing with AIT for all needs in dye-sub printing or textile dye fixation.

Features:

• Belt feeding system with independent drive for feeding cut parts
• Available in 13" (33 cm dia.), 24" (60 cm) or 39” (99 cm) oil heated drum
• Belt speeds of 3.2 or 6 fpm respectively @ 40 second dwell time
• 77" (196 cm ) wide Nomex felt for 72" (180cm) wide printing
• Electro pneumatic belt steering system
• Safety bar with reverse control
• Cool down timer
• Exit cooling conveyor
• Automatic paper separator bar eliminates ghosting caused by paper shifting or fabric shrinkage
• Exit cooling conveyor cools and take printed parts to the back side for stacking
• All motors DC brushless
• Three unwind/rewind stations for roll to roll printing

6572-30: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

6572-60: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

6572-100: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

(Available w/o Unwind/Rewind Features - Call For Quote)

LFO/GFO 60/72/104/126 - The AIT Grand Format rotary heat press is the culmination of over 25 years of manufacturing heat presses for the sublimation printing industries. High productivity, quality engineering design and conscientious after-the sale service are all good reasons for investing with AIT for all needs in dye-sub printing or textile dye fixation. A self contained, oil heated drum system, assures uniform heat across the width of the cylinder and the lowest possible power consumption. Compare features with all competition! High productivity with low power consumption – a speed of 3.75 fpm with the lowest power consumtion per printed foot of any comparable machine. Multiple safety systems, high quality electronic and pneumatic components and ergonomic, light weight air shafts minimize down time and maximizes investment return.

Features:

• Oil heated drum. Self contained with digital heat control
• Digital variable speed control
• Unique belt steering system maintains constant belt position
• Multiple printing widths available
• 3 unwinds with pneumatic clutches
• 3 rewinds with pneumatic clutches and independent speed controllers
• Six lightweight air shafts
• Safety chucks for fast and safe loading and operation
• Large 13'' (33 cm) or 24'' (60 cm) diameter heated drum for faster speeds
• 3.75 fpm printing speed at 40 second dwell time
• Twin "S" wrap bars for fabric tensioning
• Hand safety protection at entrance
• E Stops at all corners
• Lanyard controlled reversing system for safety & ease of feeding
• Dual Safety Reversing Systems
• Low maintenance, brushless drive motors
• Automatic "cool – down" mode

Options:

• Roll up table loading

LFO 60:
13" Diameter Drum: Call for Quote
24" Diameter Drum: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

LFO 72:
13" Diameter Drum: Call for Quote
24" Diameter Drum: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

GFO 104:
8" Diameter Drum: Call for Quote
13" Diameter Drum: Call for Quote
24" Diameter Drum: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

GFO 126:
13" Diameter Drum: Call for Quote
24" Diameter Drum: Call for Quote
Domestic Crating: Call for Quote
Export Crating: Call for Quote

(Available w/o Unwind/Rewind Features - Call For Quote)

The 7616 has been sold for over two decades for the continuous printing of narrow web fabrics from shoe laces to seat belts. The transport belt on the machine is 16'' wide. The machine comes with 5 lanes for the substrate/transfer paper. The transfer paper for high production sublimation printing has traditionally been produced on ''flexo-graphic'' printing presses. In recent years, digital ink jet printers have made short run and customized printing a reality. The 7616 is designed to operate equally as well with either process. The new oil heated drum system allows high production speeds with minimum fluctuation of temperature across the width.

Features:
• 13" (35 cm) printing area
• Oil heated drum with digital heat control
• Unwind discs & guides for narrow web transfer paper
• Unwind and rewind system for blotting tissue to control dye contamination
• Unwind and rewind for full width transfer paper
• Easy On/Off Belt removal
• Low maintenance- 1 hour belt change procedure
• Alarm signal, if temperature varies above or below set point
• Digital speed indicator
• Automatic cool-down timer
• Belt width: 41cm (16")
• Machine Dimension: 126 x 113 x 155 cm (49" x 44" x 61")
• Production Speed: 4.3 m/m (14fpm) @ a 20 second dwell time (typical "flexo" speed)
  2 m/m (7 fpm) @ a 40 second dwell time (typical "digital" speed)
• Max Belt speed: 9 m/m (10 ypm)
• Power: 7,2 kw (31 amp) Avg. Consumption 3,6 kw/h (16,5 amp)
• Net weight: 862 kg (1,900 lbs)

Optional Feature:
5 Station powered drop-off stand: Call for Quote

Domestic Crating: Call for Quote
Export Crating: Call for Quote

The "Original" 109 heavy duty roll goods truck is designed to keep rolls separate and within reach. It has 12" long arms (tiers) that are adjustable and/or removable. Available with 4, 5, and 6 tiers on each side (Shown with four tiers and optional middle casters). Perfect for textile manufacturers, sewing rooms, warehouses, hardware stores, plumbing suppliers. The basic 109 model roll goods truck has a 1500lb capacity. It comes with industrial grade 5"x 1-1/4" non-marking casters, two swivel & two rigid. The size is 74"Hx40"Lx33"W. Weight is 116lbs. Standard color is blue. Made in U.S.A.

The Model 109 has many uses such as storing or transporting bolts of cloth, vinyl, paper, pipe, tubing, bars, rods, conduit.

Used In Retail/Department Stores/Distribution Centers For Over 30 Years! NOW AVAILABLE TO THE PUBLIC.

Guaranteed to never bend, sag, break or tip over when used under normal conditions.
"Normal Conditions" meaning indoor use on reasonably level floors.

4 Tier - 3 Sets of Arms: Call for Quote
5 Tier - 4 Sets of Arms: Call for Quote
6 Tier - 5 Sets of Arms: Call for Quote
Additional Arms - Set of 2: Call for Quote
Large Format Piece Goods Truck - 5 Tier (120" goods) Call for Quote

Base Model:

Eliminates double handling! Pull cloth right from the truck to the cutting table. Designed for easy maneuvering in narrow aisles. Supplied with eight sets of bar brackets, four per side (Additional sets available). Comes in various sizes that handle 60" - 140" goods.

Standard Model:

• 2000 lbs Load Capacity
• Four 6” x 2” Casters. 2 positional w/brakes, 2 swivel w brakes
• 8 sets adjustable cloth holders
*Heavy Duty Model

• 3000 lbs capacity
• Six 6” x 2” casters with locks. 4 swivel with brakes. 2 positional w/brakes
• 8 sets adjustable cloth holders


Standard Model - Price w/Bars
60" Goods Max: Call for Quote
66" Gods Max: Call for Quote
72" Goods Max: Call for Quote
78" Goods Max: Call for Quote
96" Goods Max: Call for Quote
*126" Goods Max: Call for Quote
*140" Goods Max: Call For Quote

OPTIONS

• Roller Bearings — Call for Quote
• Additional Cloth Bar Brackets - Call for Quote
• Tapered Cones — Call for Quote

The A.I.T. 1211PA Automatic Heat Seal Label Press is a pneumatically operated heat press especially suited for the automatic application of small transfers (flock , flex, thermoplastic and formatex).

Features include foot pedal operation and four individual program cycles. Two cycles permit fully automatic operation with user defined press time settings. The transfer is automatically placed onto the substrate, the heated top platen is engaged and then releases after a preset time. An alternate program includes a preheat cycle for substrates including nylon, ripstock and vinyl. Also included is a program to allow for precise repositioning of the transfer onto the substrate.

Especially useful for attaching logo transfers to garments, the label feeding arm holds the transfer in place above the garment while the operator can reposition it according to the cross hairs of the included laser light system.

Standard features also include digital time control, independent top and bottom temperature controls and a head safety device. Designed for flexibility , the feed system magazine can be quickly changed to accommodate various sizes of transfers between 1 x 1 inch and 4 x 4 inch.

Custom size dies may be attached to the top plate to precisely regulate the area of the substrate which will be subjected to heat. Additionally, the work table surrounding the bottom platen can be easily removed to accommodate irregular shaped objects such as bags and backpacks.

Features:

• Automatic loading system for PRE-CUT transfers
• Independent top & bottom heating
• Laser light positioning system
• Digital time & temp controls
• Head safety device
• Timer range 0–999.9 sec.
• Voltage 220V, 1 PH, 10 Amps
• Inline Air Pressure: 90 PSI
• Applied force up to 12 PSI
• Temperature range: 140°-575°F

Domestic Crating: Call for Quote
Export Crating: Call for Quote

The A.I.T. 1224PA Automatic Heat Seal Label Press is a pneumatically operated heat press especially suited for the automatic application of roll transfers. Features include foot pedal operation and automatic positioning of transfers by an infra-red photocell.

Standard features also include digital time control, independent top and bottom temperature controls and a head safety device. The 1224PA also includes a low pressure regulation system to allow operation with a minimum of 1.5 PSI when working with sensitive materials including gold, leather and plastic.

Pieces per hour will be dependant on the dwell time for the transfers, and the time needed for the operator to unload and load the garment piece. The video demonstrates the speed of the machine operation.

The operator activates the machine using a foot pedal, and the press cycle time is controlled by a digital timer. At the end of the programmed time, the heated platen is raised and the roll of transfers is automatically indexed to the next transfer.

Includes Three Modes of Operation:
1) Automatic operation as described above.
2) Manual placement of transfers. The operator places a cut transfer manually onto the garment piece, and then activates the press cycle with the foot pedal.
3) Automatic operation, with the option to reposition the garment. The operator activates the machine with the foot pedal to lower the transfer paper just above, but not in contact with, the item receiving the transfer. The operator may then reposition the piece before activating the press cycle.

Designed for flexibility , the feed system can accommodate various sizes of transfers between 3/4" x 3/4" and 9-3/4" x 9-3/4". Additionally, the bottom platen can easily accommodate irregular shaped objects such as bags and backpacks.

Features:

• Automatic loading system for roll fed transfers
• Independent top & bottom heating
• Laser light positioning system
• Digital time & temp controls
• Head safety device
• Timer range 0 – 999.9 sec.
• Inline Air Pressure: 90 PSI
• Applied force up to 12 PSI
• Temperature Range: 140°-575°F


Options:

• Steel Stand
• Custom Die Sizes

Domestic Crating: Call for Quote
Export Crating: Call for Quote