Hotronix 6"x6" Power Heated Platen for Hotronix Heat Presses

The Tool You Need to Eliminate Scorching.

Hotronix Heated Lower Platen Technology, an innovation combined to give you better results. Confidently tackle delicate polyester and tri-blends with the fully threadable bottom heated platen. Heat from the lower platen melts vinyl adhesive, allowing a lower application temperature from the top platen. Compatible with any Hotronix Clam with a quick release latch, including the Hotronix Auto Clam, MAXX Clam, Dual Air Fusion IQ & Air Fusion IQ.

Benefits

• No more scorched garments
• Eliminates the need to pre-heat garments
• Ensures 3D and die-cast emblems retain their full dimension & reduces application time

Features

• Multiple Sizes available (16"x20", 6"x20", 11"x15", and 6"x6")
• Built-in pillows for dealing with zippers, buttons and seams
• Compatible with Hotronix® or MAXX® models
• Digital microcontroller (Sold Separately)
• Anti-static Quick Slip platen protector stays cool to the touch for operator safety
• Fully threadable heated bottom platen
• Melts adhesive from below reducing high heat from the upper platen to protect sensitive polyester pieces
• Dedicated 20-amp circuit required
• 2-year warranty
• Weighs 40% Less than the previous model (Heated Lower Platen)
• Ships via ground

The heated lower platen is compatible with models: STX (shirt presses), MAXX, XRF, XRF2 models only (Not compatible with Hotronix Fusion IQ or draw presses). Find your model and serial number on the base of the heat press and give us a call if you need help!

The newly designed bottom heat Power Controller (by Stahls) has a max temp of 320F. Intended uses for this product are: Heat transfer vinyl, heat transfers and any other low temp applications up to 320F.
Please note: This is not adequate for sublimation applications.

Requires the Power Platen Controller (sold separately).