Stahls Platen Attachments For Hotronix and MAXX Heat Press Machines

For use with all Stahls Mighty Press & Hotronix cap press models. Using the proper size platen will prevent caps from being stretched or wrinkled on platens that are the wrong size

Note: Stahls Cap Presses come with 3.5" x 6" standard platen.

• 3.5"x6" For standard caps
• 2.75"x6.5" For low profile caps
• 2.5"x3" For child/baby size hats
• 4"x6.5" For full crown ball caps
• 4"x8" For oversized caps
• 3"x5.75" For low crown caps

These optional platens are for use with these models only:
Mighty Press Clam: 16x20
Mighty Press Digital: 16x20
MAXX: 11x15, 15x15 & 16x20
STX Hotronix Auto Clams: 11x15, 16x16 & 16x20
Hotronix Fusion, Swinger, Draw and Air Swingers.

Using the proper size platen will help you work faster with less waste.

• 7" Round "Bagger"
• 6"X10" "Shortstop"
• 8"X10" "Tote Master"

Decorate up to 8 can coolers at once!

Be fully prepared to decorate can coolers, popular for commemorating parties and events and as promotional giveaways.

With sturdy steel construction, the Can Cooler Platen can decorate up to eight can coolers at once. With no rubber pads on the platen, it's easy to dress, decorate, and undress can coolers.

Platen measures 16" x 20" x 5" and fits 16" x 20" Hotronix and 16" x 20" MAXX heat presses.

Take advantage of this hot new cap printing trend even if you don’t own a cap press with a curved platen. You can turn your Hotronix garment press into a cap bill printing machine with our new specialty platen.

The Hat Bill Platen is an exclusive platen designed for heat printing on the brim of a hat or cap. It's unique design allows you to easily fit up to 4 hats on the platen per press. You can also flip your hat around and press the top of the bill as well. While a variety of hats can be pressed with this platen, it is primarily targeted for flat brim caps.

• Compatible with Heat Presses 15x15 or Larger. Will Not Work with STX11, MAXX11 (11x15 presses)
• Press up to 4 Hats at a Time
• Easily Interchange Between Other Platens
• Shipping Weight: 17 lbs
• Shipping Dimensions: 20" x 18" x 16"

Perfect for small items, youth apparel and garments that have buttons, zippers, and seams in close proximity.

Size: 4”x4” - Fits Maxx, Fusion and STX Auto Open presses only.

Decorate sleeves, pant legs, and youth size garments with ease.

Size: 6”x20” - Fits Fusion and Air Fusion presses only.

Twice the production capabilities in a single platen. Compatible with all 16" x 20" Hotronix heat presses, its slim design is ideal for heat printing slender items such as adult and youth shirt sleeves, pant legs, or use the center point to add labels to necklines and collars.

Our "Most Valuable Platen". Easily decorate youth and women’s size garments.

Size: 11”x15” - Fits Maxx, Fusion and STX Auto Open presses only.

Makes shoes and other specialty items easy to decorate.

Easily customize sneakers, cleats, slippers, golf shoes, and fashion footwear that won't fit on standard platens. This specially designed lower platen allows you to decorate a pair of shoes at the same time, saving time and effort.

Print designs up to 2" x 4" on the sides of most popular youth and adult size shoes. Can also be used for application on footwear with collapsible heels, such as sandals.

The flexible application pad is made from a thin rubber silicone. Use this to cover any item that has buttons, zippers, or snaps to avoid scratching the upper platen of your heat press.

If your heat press is on a heat press Caddie you will be able to change lower platens.

The Heat Press Caddie has through-holes, allowing you to access the lower platen's bolts.

With a platen size of 6″ x 15″, the Shoe Platen can be used on any standard Hotronix® or MAXX® heat press.

Features
• Platen Size: 6" x 15"
• Actual Weight: 8 lbs
• Actual Dimensions: 15" x 6" x 4"
• Shipping Weight: 10 lbs
• Shipping Dimensions: 15" x 8" x 8"

Hotronix Heat Press Caddie Stand

Take your heat press to the next level! The Heat Press Caddie is a stand that converts any *Hotronix® or MAXX™ Clam into a threadable heat press.

• Threadable - Front to back, back to front, or side to side. Simply load your shirt once and rotate it right on the platen.
• Portable - Take it anywhere! Heavy duty, self-leveling casters allow you to wheel your press around your shop.
• Adjustable - Raise or lower the height of the press to enhance individual operator comfort for a completely ergonomic experience.
• Caddie weight 25 Lbs
• Shipping weight 66 Lbs

*Please Note: Caddie Stand will not work with Fusion Press, nor older Stahls clam shell presses. Works with Hotronix Auto-Open clam shell and MAXX clam shell presses only.

The fast, efficient, organized way to use your Heat Press Caddie!
Are you looking for a way to keep your apparel items organized while keeping them out of the way during the heat printing process? The Heat Press Caddie Shelves make it easy to keep your apparel items within reaching distance and yet far enough away where they are not in the way. The Hotronix® Heat Press Caddie Shelves has two shelving units, one on each side of the machine. This allows you to easily grab your apparel items from the first shelf, heat press them, and make a pile of heat pressed garments on the second shelf. This shelving system can be attached to the pedestal of the Heat Press Caddie or to the Air Fusion. The arms of the Shelves are adjustable so you can choose to have them closer to the machine or a little further away. The adjustable arms also allow you to determine whether you would like the shelves to be horizontally or vertically aligned with the machine.

Features
• Create room to work on your mobile station
• Trays can rotate horizontally or vertically
• Color: Silver Framework with blue Shelves
• Adjustable height
• Size of individual shelves: 13" W x 18" D
• Complete shelving with arms extended: 6' across
• Recommended weight limit is 10 lbs. per shelf
• 1 year warranty
• Weight: 25lbs

Available For:
Stahls' Hotronix Heat Press Caddie™
Stahls Hotronix Air Fusion™ (pedestal model only)
Click Here for installation instructions
*Some assembly required. Heat Press and Caddie sold separately.

Turn your Hotronix or MAXX clam shell heat press into a thread-able heat press. Thread garments, tote bags and more for easy and faster production. Space saving design for shops that have fixed counter space. No assembly required.

A tabletop version of the Heat Press Caddie that will allow customers to thread a garment even when their Hotronix or Maxx Clam heat press is on the counter.

No Casters, no adjustable height option.

Shipping weight 27 Lbs

Compatible Heat Press Machines
Hotronix Clam 11"x15" - 110V (STX11)
Hotronix Clam 16"x16" - 110V (STX16)
Hotronix Clam 16"x20" - 110V (STX20)
Hotronix Hover Press 16"x20" - 110V (STX20HP)
MAXX Press 11"x15" (MAXX11)
MAXX Press 15"x15" (MAXX15)
MAXX Press 16"x20" (MAXX20)

Compressor to operate all air powered heat presses for these Hotronix models: Air Fusion and Air Swinger. Plus table top air models from Geo Knight, Hix and Insta Graphic. No need to spend time figuring out what air compressor you need. This air compressor is the matching compressor for all the above heat press models.

Features
• Amperage (amps) 4.8
• Average air consumption CFM/2.1
• Capacity 4 gal
• Horsepower (hp) 1hp
• Maximum pressure (PSI) 120
• Voltage (volts) 120
• Product Height 22"
• Product Width 18"
• Product Length 18"
• Warranty 90 Day
• Decibels 45
• Weight 58lbs.
• Ships via ground

Great accessory for any heat printing shop.

Adjustable, portable cart for a heat press, vinyl cutter, laser cutter, or DTG. It can also double as an extra layout table.

• Heavy duty steel cart
• Dimensions: 37.6" x 24" x 17.3"
• Crank raises the cart to a maximum height of 35" or lower to 17"
• Comes fully assembled
• Holds up to 600 lbs
• Heavy duty casters allow cart to be mobile
• Actual weight: 122 lbs
• Ship weight: 126lbs
• Ship dim. 38.2″ x 24.8″ x 18.11″
• One Year Warranty
• Made in the USA

The Tool You Need to Eliminate Scorching.

Hotronix Heated Lower Platen Technology, an innovation combined to give you better results. Confidently tackle delicate polyester and tri-blends with the fully threadable bottom heated platen. Heat from the lower platen melts vinyl adhesive, allowing a lower application temperature from the top platen. Compatible with any Hotronix Clam manufactured after 1990, including the Hotronix Auto Clam, MAXX Clam, Dual Air Fusion, Air Fusion, and Swinger.

Benifits

• No more scorched garments
• Helps reduce the risk of dye migration on polyester
• Eliminates the need to pre-heat garments
• Ensures 3D and die-cast emblems retain their full dimension & reduces applicaiton time
Features

• 16" x 20" surface
• Compatible with Hotronix® or MAXX® models
• clam presses manufactured after 1990
• Separate Digital microcontroller
• Anti-static Quick Slip platen protector stays cool to the touch for operator safety
• Fully threadable heated bottom platen
• Melts adhesive from below reducing high heat from the upper platen to protect sensitive polyester pieces
• Dedicated 20 amp circuit required
• 2 year warranty
• Weight 42lbs
• Ships via ground

The heated lower platen is compatible with models: STX, MAXX, XRF, XRF2, XRS, XS models only (Not Compatible with the manual Fusion XF press) Works on presses that are manufactured after 1990. Find your model and serial number on the base of the heat press and give us a call if you need help!