Sign Making Tools, Storage Racks, Squeegees, Brushes & More!

The Universal Scraper is a perfect tool for smoothing down Adhesive Vinyl designs on smooth surfaces, gently removing shapes & letters from cutting mats, creasing paper to create the perfect fold, etc

The Universal Hook is a perfect tool for removing (weeding out) intricate shapes and letters from cutting mats, sign making vinyl's, etc

Why brush when you can roll?

Roll vinyl over rivets and contours in seconds with RollePro!

The RollePro's ergonomic design and specially formulated heat-resistant wheel brings speed and comfort to a once time consuming application process.

HOW DOES IT WORK FOR RIVETS?

Three Easy Steps

• Leave an open un-sqeegeed air channel over a row of rivets or around any contoured surface.
• Use a heat gun; preferably a torch to heat the loose vinyl over that area to 180 - 200 degrees.
• Use the RollePro to roll down the vinyl in one smooth motion.

To see a full demonstration click here!

Who uses the lil'chizler?
Auto-detailers, painters, sign shops, warehouses, body shops, scrap-bookers, window cleaners, packing & shippers, Manufacturers, window tinters, decal installers, aquarium owners, kitchen & restaurant workers, auto graphic installers, commercial cleaners, Machinist, factory workers, sportsman, tile installers, museum workers, artists.

Safely scrapes and cuts away like a sharp chisel.

Dozens of uses:
Pot & pan scraper, Pocket sleet scraper, Snow ski boot & binding scraper, Paint or tar scraper, Putty Knife Fish scaler, Etc.

Effectively scrapes any surface you don't want to mar or scratch.

3M Gold Applicator - The best you can buy! This nylon 3" x 4" gold squeegees doesn't leave trails, last longer. Low friction squeegee help remove air bubbles.

Double bladed, extra long (5) inch squeegee, allows easier application of pressure sensitive materials. Size: 5in. x 3 in.

Double bladed, extra long (5) inch squeegee, that allows easier and safe application of pressure sensitive materials with inked or scratch sensitive surfaces. The applicator has soft fabric on one edge and a strip of teflon*™ on the other. Size: 5in. x 3 in.

One and one half (1-1/2) inch diameter hardwood handle, with short stiff bristles, aids in applying pressure sensitive materials to rivets and compound curves.

Three (3) inch diameter hardwood handle, with short bristles aids in applying pressure sensitive materials to large textured areas such as, brick, cement, stucco, banners, etc. Also used when applying graphics on vehicles.

This all purpose precision tool kit will help “fix” the problems and make it easier when cutting, weeding or stripping any type pressure sensitive films/materials for the sign, screen printing or lithographic industries. MADE IN THE U.S.A. All components are engineered with high quality material for the best results.

The kit consists of:

• One unique Vinyl Weeding / Masking Film Stripping Tool with a ball tip point that will not damage clear film substrates
• One Wooden Burnisher Tool with a hardened steel needle on one end to eliminate air bubbles when applying vinyl
• One Knife with extra cutting blade and Weeding Tool
• One pair of Needle Nose Tweezers

Single set of high quality stainless steel tweezers. Packaged in a plastic tube.

Unique vinyl weeding/masking film stripping tool, with a ball tip point that will not damage clear film substrates. Packaged in a plastic tube.

Single high quality cutting knife that comes with two XB-7E blades, and a weeding tool. Comes with a safety cap in a plastic tube.

Box of 100 blades substitute for XACTO™ blade #X611.

This high quality #12 pouncing tool is the standard for hand pouncing. Packaged in a plastic tube.

This product is red in color and used to aid in the lifting of pressure sensitive material and the removal of adhesive from surfaces. If used correctly, it will not scratch the substrate. It is made of a special aircraft plastic that makes it very durable. It is designed to prevent hand fatigue when used continually on big jobs. It comes in 100 units per case. Size: 3/4in. x 6 in.

The roller applicator allows firm 90° downward pressure when applying pressure sensitive adhesive materials, without scratching the surface, no matter what angle the user holds the handle.

Designed to allow the rolling out of any width material up to one hundred fifty (150) lbs. The user can unroll or re-roll material without any effort and eliminates the possibility of any material damage. It can also be used as roll feed roller for sprocketed and nonsprocketed drum cutter/plotters.

This product was made to sit on the floor in front and/or in back of a plotter. It prevents both inkjet and cut materials from getting contaminated by touching the floor. For larger width materials, use two racks, spacing them 3 to 4 feet apart. Size: 30 in. long x 24 in. wide.

Heavy gauge wire constructed rack holds sixteen (16) rolls of 3 inch core diameter material without using valuable floor space. This rack is durable enough to hold even up to 16 rolls of 30 in. x 50 yd. material with ease. Proper storage of pressure sensitive materials dictate supporting rolls by the core to avoid adhesive activation. Included are adjustable screw mounting clips, allowing alignment with studs in most walls. Holds up to 30 in. x 50 yds. material. Size: 22 in. x 28 in.

This product is made of heavy gauge wire and constructed to hold (16) sixteen rolls of (2) two or (3) three inch core diameter material up to (1000) one thousand pounds. This rack is durable enough to hold up to 72 inch wide material with ease. Proper storage of wide format materials dictate supporting rolls by the core to avoid damaging the special coating on the roll face. The rack comes with (16) sixteen high impact protective plastic rings the prevent material damage while storing on rack. The unit has (9) nine ball caster rollers to allow easy movement with the rack fully loaded. Size: 29 in. x 29 in.

Heavy gauge wire portable, attachable handle that allows easy pulling and relocation of the FR-1623 material floor rack.